denable
Enables action points
Format: 
Enables some action points
denable action-point-list [ -block number-list]
Enables all disabled action points in the current focus
denable -a
Arguments: 
action-point-list
The identifiers of the action points being enabled.
-a
Enables all action points.
-block number-list
If you set a breakpoint on a line that is ambiguous, this option names which instances to enable. Use the dactions command to obtain a list of these numbers.
Description: 
The denable command reactivates action points that you previously disabled with the ddisable command. The -a option enables all action points in the current focus.
If you did not save the ID values of disabled action points, use dactions to obtain a list of this information.
If you do not indicate a focus, the default focus is the process of interest (POI).
Command alias: 
 
Alias
Definition
Description
en
denable
Enables action points
Examples: 
denable 3 4
Enables two previously identified action points.
dfocus {p1 p2} denable -a
Enables all action points associated with processes 1 and 2. This command does not affect settings associated with other processes.
en -a
Enables all action points associated with the current focus.
f a en -a
Enables all actions points in all processes.
en 1 -block 3 4
Enables the action points associated with blocks 3 and 4. That is, one logical action point can map to more than one actual action point if you set the action point at an ambiguous location.
denable 1 2 -block 3 4
Enables the action points associated with blocks 3 and 4 in action points 1 and 2.