Totalview® Reference Guide : PART I CLI Commands : Chapter 2 CLI Commands : ddisable
ddisable
Temporarily disables action points
Format 
Disables the specified action points
ddisable action-point-list [ -block number-list ]
Disables all action points
ddisable -a
Arguments 
action-point-list
A list of the action points to disable.
-block number-list
If you set a breakpoint on a line that is ambiguous, use this option to identify the instances to disable. Obtain a list of these numbers using the dactions command.
-a
Disables all action points.
Description 
The ddisable command temporarily deactivates action points. To delete an action point, use ddelete.
You can explicitly name the IDs of the action points to disable or you can disable all action points.
If you do not indicate a focus, the default focus is the process of interest (POI).
Command alias 
Alias
Definition
Description
di
ddisable
Temporarily disables action points
 
Examples 
ddisable 3 7
Disables the action points with IDs 3 and 7.
di -a
Disables all action points in the current focus.
dfocus {p1 p2 p3 p4} ddisable -a
Disables all action points associated with processes 1 through 4. Action points associated with other processes are not affected.
di 1 -block 3 4
Disables the action points associated with blocks 3 and 4. That is, one logical action point can map to more than one actual action point if you set the action point at an ambiguous location.
ddisable 1 2 -block 3 4
Disables the action points associated with blocks 3 and 4 in action points 1 and 2.