Rogue Wave banner
Previous fileTop of DocumentContentsIndexNext file

6.8 Using Trace Filters

A filter is a specialized client that receives trace messages and, unlike regular clients, also forwards these messages to other clients or filters.


CAUTION: To avoid losing trace messages, always connect all the filters and clients to each other first, before making a final connection from the first filter to the manager (see Section 6.6.1).

6.8.1 Using the Predefined Filters

The Execution Tracing package provides two concrete filters, RWTraceLevelFilter and RWTraceMultiClientFilter.

6.8.1.1 Using RWTraceLevelFilter

The RWTraceLevelFilter filter is used to dynamically filter trace events at runtime. The setLevel() function can be used by your program to reset the filter's cut-off level at any time during your program's execution. This filter and two other ways of filtering trace events are compared in Section 6.10, "Controlling Trace Output."

Example 57 shows how to use the RWTraceLevelFilter class:

Example 57 -- Implementing dynamic filtering of trace events

The following is a description of each program line:

//1Compile in all trace macros by setting the user trace level macro to 8. This line sets the maximum trace level to compile into the code. To compile in all the trace macros, the level is set to the maximum 8 (Entry/Exit). You could also define the trace level on the command line for your compiler, using the -DRW_USER_TRACE_LEVEL=8 flag.
//2Create a normal ostream client to display the trace information.
//3Instantiate an RWTraceLevelFilter. The constructor takes the maximum level of trace messages to pass through. You can pass an integer level number (see Section 6.1.3) or use one of the symbolic constants, as in this line. Pass 0 to filter out all trace messages.
//4Connect the client to the level filter.
//5Then connect the filter to the trace manager.
//6Declare the function as traceable, so you can use trace event generation macros in this function.
//7Change the cutoff level on the level filter, using the setLevel() function.

The symbolic constants referred to in line //3 are defined in the file rw/trace/RWTraceEventSeverity.h. They cannot be used when setting the RW_USER_TRACE_LEVEL macro, because this macro needs to be set before including any trace header files.

The constants are: RW_TRACE_LEVEL_FATAL, RW_TRACE_LEVEL_ERROR, RW_TRACE_LEVEL_WARNING, RW_TRACE_LEVEL_INFO, RW_TRACE_LEVEL_TEST, RW_TRACE_LEVEL_DEBUG, RW_TRACE_LEVEL_ENTRY and RW_TRACE_LEVEL_NONE. They all map directly to the appropriate severity level. RW_TRACE_LEVEL_NONE filters out all trace messages. It is equivalent to zero.

6.8.1.2 Using RWTraceMultiClientFilter

Sometimes it is desirable to connect multiple clients to the manager or a filter. The RWTraceMultiClientFilter class facilitates this. Example 58 creates two clients; one displays messages on the screen, and the other saves them to a file. This example can be found in examples\thr0200osfam\trace\example2.cpp.

Example 58 -- Using two trace clients

The following is a description of each program line:

//1Instantiate the multi-client filter.
//2First connect the two clients to the filter.
//3Then connect the filter to the manager to ensure that no trace messages are lost.
//4Generate some trace messages.

6.8.2 Chaining Multiple Filters

Instead of using only one filter attached directly to the trace manager, you can chain together several filters. To connect them, use the downstream filter's connect() member function and pass it the upstream filter as an argument, similar to this:

6.8.3 Creating User-defined Filters

Creating a user-defined filter follows the same pattern as creating a user-defined client. You must create a derived body class, where you specify the rules for filtering. If your filter's body class has any new public members (in addition to those inherited from its base classes), you must also create a corresponding derived handle class. The predefined Trace Level filter was created in the same way that you would create your own filter, so the source code for RWTraceLevelFilter and RWTraceLevelFilterImp is an example.

6.8.3.1 Creating the Filter's Body Class

The filter's implementation must derive from RWTraceSingleClientFilterImp, for a single-client filter, or RWTraceMultiClientFilterImp, for a multiple-client filter.

The doTrace() function. You specify the rules for filtering by redefining the doTrace() member function, which is inherited from RWTraceEventClientImp. The RWTraceEventClientImp::doTrace() function is declared pure-virtual, so a derived body class must provide an implementation of this function.

For a single-client filter, check that the event meets your filter's criteria and forward it to the connected client, using the trace() member function. Example 59 is taken from the source code for RWTraceLevelFilterImp.

Example 59 -- Creating a single-client filter

For a multi-client filter, iterate over the connected clients and selectively forward the trace events, based on your filter's criteria. Example 60 is taken from the source code for RWTraceMultiClientFilterImp.

Example 60 -- Creating a multi-client filter


NOTE: Do not embed trace macros in the filter's trace event processing code. To prevent infinite recursion, the trace manager ignores any trace events generated by a filter.

The static make() function. If you are using the predefined handle class, your body class must supply a static make() function. (If you are creating a derived handle class, you can skip to Section 6.8.3.2.) The make() function constructs a body and returns a handle to it. This example is taken from the source code for RWTraceLevelFilterImp.

Example 61 -- Creating a filter body class to use with the predefined handle class


NOTE: The returned handle's type is actually the parent class of your derived handle.

6.8.3.2 Creating the Filter's Handle Class

If your filter's body class has any new public members (in addition to those inherited from its base classes), you must create a derived handle class that forwards those calls to your body. Derive your handle from RWTraceMultiClientFilter, for a multiple-client filter, or RWTraceSingleClientFilter, for a single-client filter. For an example, see the source code for RWTraceLevelFilter:

6.8.3.3 Instantiating Your Derived Filter

If you created your own derived handle class, you can instantiate your derived filter like this:

If you did not create your own derived handle class, you must explicitly instantiate a body with your body class's make() function and pass the body to a handle of type RWTraceEventFilter, as shown in this example:

Use your filter as you would any predefined filter, as discussed in Section 6.8.1.


Previous fileTop of DocumentContentsIndexNext file

©Copyright 2000, Rogue Wave Software, Inc.
Contact Rogue Wave about documentation or support issues.